Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Pomona?
Spring replacement in Pomona typically costs $180 to $340 for a single torsion or extension spring, including labor and materials. Most standard two-car doors use a pair of torsion springs, so many homeowners land in the $260 to $340 range for both. We quote the exact number on-site before any work starts, so you’re never guessing what the final bill will be.
A broken spring is one of the few garage door failures you can’t work around. The door won’t lift, the opener strains against dead weight, and the whole system sits frozen until it’s fixed. That’s why we treat spring calls as priority work in Pomona and give a firm price up front.
Key Takeaways
- Single spring replacement: $180 – $340, typically the full job with labor.
- Most Pomona homes have torsion springs mounted above the door, not the older extension springs along the sides.
- Replacing both springs at once costs less over time than replacing them one at a time months apart.
- We service the brands already in your garage: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Free estimates, and we’ll tell you honestly whether a spring swap or a full door replacement makes more sense.
Spring Replacement Cost Breakdown (2026)
Here’s what spring work runs in the Pomona market this year. These are real ranges based on the homes and door systems we see across the city, from older single-car garages near downtown to newer two-car doors out toward Phillips Ranch.
| Line Item | Typical Cost Range |
|---|---|
| Single torsion spring replacement | $180 – $280 |
| Pair of torsion springs (most two-car doors) | $260 – $340 |
| Extension spring replacement (per spring) | $150 – $230 |
| High-cycle spring upgrade (rated for more open/close cycles) | $60 – $120 added |
| Spring plus cable replacement (when cables show wear) | $290 – $450 |
| Spring plus roller and hinge refresh | $280 – $430 |
Related repairs often come up during a spring job, and it helps to know the surrounding numbers. Cable repair runs $130 – $250. Roller replacement is $110 – $220. Track realignment sits at $120 – $240. If the opener was damaged when the spring let go, opener repair is $120 – $320. Broader garage door repair work falls in the $150 – $600 band. When a door is old enough that the springs, panels, and opener are all failing together, new door installation runs $700 – $2200, and we’ll walk you through whether that math beats repairing.
The biggest cost driver is spring type and count. A single extension spring on a light one-car door sits at the low end. A matched pair of torsion springs on a heavy insulated two-car door sits at the top. High-cycle springs cost more upfront but last roughly two to three times longer, which matters if your household opens the door six or eight times a day.
What Affects Spring Replacement Pricing in Pomona
- Torsion versus extension springs. Torsion springs mounted on a center shaft are the modern standard and cost more to replace because they’re under high tension and require careful winding. Extension springs that run along the horizontal tracks are cheaper but stretch and fatigue differently. Most Pomona homes built in the last 30 years have torsion systems.
- One spring or two. Many doors are engineered for a pair, and when one breaks the other is usually near the end of its life. Replacing both together is usually a modest add-on versus a second service call later.
- Door weight and insulation. A steel insulated door weighs considerably more than a basic uninsulated panel. Heavier doors need higher-rated springs, which cost a bit more.
- Cable and drum condition. Springs and cables wear together. In Pomona’s dry inland climate, we see cables fray and drums groove over time, so a spring job sometimes reveals a cable that should be replaced at the same time. Cable repair runs $130 – $250 on its own.
- Access and mounting. Low-headroom garages, tight side clearances, and older homes with non-standard mounting all add labor time. A clear, standard two-car garage is the fastest job.
- Spring cycle rating. Standard springs are rated around 10,000 cycles. High-cycle springs rated for 20,000 to 30,000+ cycles cost more but cut how often you’ll be making this call.
One local note worth saying plainly: the Inland Empire’s summer heat and dry air speed up metal fatigue. Springs in Pomona tend to fail after a few years of hot-season cycling, and we regularly see them snap on the first warm mornings of spring. That’s why we check the surviving spring on every single-spring job. If it’s within a few thousand cycles of the one that just broke, we’ll tell you so you’re not paying for two separate visits.
How Dangerous Is a Broken Garage Door Spring?
Genuinely dangerous. A torsion spring under load stores enough energy to cause serious injury if it’s released the wrong way, and extension springs can whip if a safety cable isn’t in place. This is the one part of a garage door we never advise a homeowner to touch, no matter how handy you are. The tension is invisible until it lets go.
What you can safely do is stop using the door and keep everyone clear of it. Don’t try to lift it by hand, and don’t keep pressing the opener button hoping it catches. The opener will strain and can burn out its gear or capacitor, which turns a spring job into a spring-plus-opener job. Call us, and we’ll come assess it safely and give you a firm price. If you want the fuller picture on how we handle these jobs, our Spring Replacement in Pomona service covers the process and timing.
How to Save on Spring Replacement
Spring pricing is fairly stable across Pomona, but a few habits keep your total down:
- Replace both springs at once. A second service call later usually costs more than doing them together now.
- Ask for high-cycle springs if you use the door heavily. The small upgrade pays for itself by spreading replacement over more years.
- Bundle worn parts. If your rollers are squealing or a cable is frayed, adding roller replacement ($110 – $220) or cable repair ($130 – $250) to the same visit saves a trip charge and labor time.
- Lubricate the springs and hinges a couple times a year. It won’t stop fatigue, but it reduces friction and squealing and helps the whole system last.
- Get a free estimate before committing. We give firm pricing up front with no surprise add-ons. Call (866) 282-7068 and we’ll quote it honestly.
We also handle opener work and full installations, so if you’re weighing a spring fix against a bigger upgrade, you get one company and one diagnosis. Same company whether it’s a tune-up or a full replacement. You can read more about our full home service offering or jump straight to the estimate.
Can You Replace a Spring the Same Day in Pomona?
Often, yes. Spring replacement is one of our most common calls in Pomona, and we keep common torsion and extension spring sizes on hand for the brands we service. Same-day availability depends on the door’s specific spring size and load, but we prioritize broken-spring calls because a dead door shuts down your whole morning.
When you call, have a few things ready: the door’s approximate width and height, whether you see one spring or two, and the brand of the door or opener if it’s labeled. That lets us bring the right parts the first time. Call (866) 282-7068 and we’ll give you a realistic window.
Repair or Replace: When a Spring Job Turns Into a New Door
Most of the time, a spring replacement is the right call. A door that’s structurally sound, tracks straight, and has good panels just needs new springs and it’s back in service. But if the door is 20+ years old, sagging, dented, and paired with a tired opener, we’ll be straight with you about the trade-off. New door installation runs $700 – $2200 in Pomona, and we install Clopay, Amarr, Wayne Dalton, and Raynor doors, so there’s a real conversation about materials and style rather than a single-brand push.
We diagnose door side and opener side separately, which matters here. Sometimes a “broken spring” turns out to be an opener drive failure, or a door that won’t open is actually a stripped gear in a LiftMaster or Genie unit. Getting the diagnosis right the first time saves you paying for the wrong fix.
Why Homeowners in Pomona Call Us for Spring Work
We’re certified to work on eight of the industry’s leading brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means the spring, the opener, and the door are all handled under one roof. We work on the brand already in your garage, whether that’s a Craftsman door from a 1990s build or a newer LiftMaster myQ setup with smart-home integration. Door side or opener side, we diagnose both.
Our three service lines cover garage door repair, garage door opener repair, and garage door installation, so there’s no hand-off to a subcontractor when a spring job uncovers an opener problem. One call, one company, one clear price. Spring work is built to move every morning, and that’s how we treat it.
FAQs – Spring Replacement Cost in Pomona
How much does spring replacement cost in Pomona?
Spring replacement in Pomona typically costs $180 to $340 for a single spring with labor and materials, and $260 to $340 for a typical pair of torsion springs on a two-car door. Call (866) 282-7068 for an exact quote, and estimates are free.
Is it cheaper to replace one spring or both?
Replacing both springs at once usually costs less overall. A single spring runs $180 – $280, while a matched pair is $260 – $340 at the same visit. Replacing them separately means a second service call and labor charge later, so the pair is typically the better value. Call (866) 282-7068 and we’ll tell you what’s right for your door.
Can I replace a garage door spring myself?
No, and we strongly advise against it. Torsion springs store enough tension to cause serious injury when released incorrectly, and extension springs can whip without proper safety cables. This is work for a trained professional. Call (866) 282-7068 and leave it to us.
How long do garage door springs last in Pomona?
Standard springs are rated for roughly 10,000 open/close cycles, which is often 7 to 10 years for typical use. In Pomona’s hot, dry inland climate, metal fatigue comes faster, and we often see springs fail on the first warm mornings of spring. High-cycle springs rated for 20,000 to 30,000+ cycles last considerably longer. We’ll quote the upgrade when we’re out.
Will my homeowners insurance cover a broken garage door spring?
Usually not. Standard homeowners policies don’t cover mechanical wear and tear, and a broken spring falls into that category. The repair is typically out of pocket, so knowing the $180 – $340 range up front helps. Call (866) 282-7068 for a firm price before you commit.
Do your rates change by day or time for spring calls?
We’ll be upfront about scheduling when you call, so there are no surprise charges. Broken springs are a priority, and we work to get out the same day when we can. Call (866) 282-7068 and we’ll give you a realistic time and price.
Get a Free Spring Replacement Estimate in Pomona
A broken spring shouldn’t stall your whole house. We give firm, honest pricing in the $180 to $340 range for most spring jobs, we service the brands already in your garage, and we tell you the truth about repair versus replace. Whether it’s a single torsion spring by the front of your Pomona home or a pair on a heavy insulated door, we’ll get it moving again. Call (866) 282-7068 for a free estimate. Eight brands, one call.
Pricing reflects the Pomona market as of 2026. Garage Door Service Pomona offers free estimates – call (866) 282-7068.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Kristen Anderson"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Robert Quinn"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Norma Salazar